|
Mod. MBO-T10 Machine with one controlled axis
The programmer manages the movements of the work table (X-axis stroke: 930 mm.)
to control the length of the mortises and the distance between them. Programming is
piloted: up to 98 work programmes can be stored. A system of adjustable cams acting
on a microswitch the various mortising depths. Manual device for adjusting the chisel
height with mechanical read-out.
Mod. MBO-T11 Machine with two controlled axes
The programmer manages the movements of the work table (X-axis stroke: 930 mm.) to control
the length of the mortises and the distance between them, and the Y-axis to control the mortising
depth. Programming is piloted: up to 98 work programmes can be stored.
Manual device for adjusting the chisel height with mechanical read-out.
Mod. MBO-T11/3 Machine with three controlled axes
The programmer manages the movements of the work table (X-axis stroke: 930 mm.) to control
the length of the mortises and the distance between them, the Y-axis to control the mortising
depth and the Z-axis to control the chisel height. Programming is piloted: up to 98 work programmes
can be stored. On all 3 models, MBO-T10/MBO-T11 and MBO-T11/3, it is possible to programme
right and left door and window posts, to control the chips removal as well as the automatic
subdivision function(English style windows)
|
| MBO - T11/3 Gearmotor with encoder to control by CN the vertical axis of the chisel unit
|
MBO - T10 - T11 - T11/3
Elettric switchboard
|
MBO - T10 - T11 - T11/3
Centralized manual pomp for lubricating guides and screws
MBO - T10
Cam stops to adjust the mortising depth |
MBO - T10 - T11
Operating head with telescopic tool guard and chisel height read-out
|
MBO - T10 - T11 - T11/3
CN - controlled pneumatic stop for resting the workpiece
|
ON REQUEST on mod. MBO - T10 - T11 Revolver stops for adjusting the tool height
|
MBO - T11 - T11/3
Linear potentiometer: it manage by CN the cross movemen of the work table to control the morsing depth
|
MBO - T10 - T11 - T11/3
Precision ball bearing screw fot the longitudinal movement of the work table
|
ON REQUEST Programmed calculator allowing a rapid readout of the tool adjustement angles
|
|
ON REQUEST on mod. MBO - T11/3
It allows to programme by CN, both in incremental and in absolute, up to four different mortising heights with different thickness for each programme even one tool only is mounted.
|
|
|
 |
